-
No matter how modern, steampunked or deviated from the recommended design :)
I'll kick things off...
Mine has a few substitutions based on what was to hand:
TL072 for the opamp
74HC4052 scavenge…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
When I try to use my 9XR-PRO with Phoneix flight simulator via the JR port all I can ever manage is for Phoenix to detect a PPM signal (the transmitter not detected message disappears) however all cha…
-
### Latest firmware used?
Keil 8051 V9.53
Tasmota 8.0.1
### Information
Sonoff RF Bridge
### Sniffed data
None......... thats the issue, read on.
### Setup
1 Sonoff Bridge
4 Sonoff DW1 …
-
As an instrument scientist, I would like units to be displayed on blocks created from the 'Frequency' and 'RF Level' PVs on the Aeroflex signal generator OPI.
### Acceptance Criterion
- Units ar…
-
I've finally received the last components and build Tayloe detector. Assembled everything partisan style on a veroboard. It definitely works. Here is a sample recording:
[pico_rx_1.mp3.zip](https://g…
-
Sorry for a newbie question - just considering to purchase BroadLink and use this HB-plugin.
Looks like when you manually control accessory from a generic remote, HB doesn’t reflect its current sta…
-
**Bug description**
Certain RF codes learnt by Sonoff RF Bridge are not sent properly. Learnt codes starting with *C001...* are transmitted properly but codes starting with *C002...* not.
**Steps …
-
Hi,
I'm still learning to use BladeRF xA9 with GNU Radio Companion and wanted to modulate a signal and send it through a RF Cable and receive it on the receiver side and demodulate to retrieve the or…
-
Hi again,
as I continued with my experiments I needed to test if some materials will block RF and how much.
In material datasheet I have found that they are using two probes for test, so I have…