-
I've noticed that when tuning, the reported value is 10kHz lower than the value I'm transmitting on with the radio.
My config is:
# DSP/RX settings
dsp_plugin="csdr"
fft_fps=9
fft_size=8192
samp_rat…
-
Line 179:
`if (data_[0] != 0x11 || data_[1] != (SENSOR_ID & 0xFF) || data_[3] != 0x07 || data_[4] != 0x0E || rcv_sensor_id != SENSOR_ID) {`
data_[4] toggles seemingly randomly between 0x0D and 0x0…
-
Ive managed to cross-compile this for OpenWRT routers in the hope of using one as a simple fm streaming server, but upon connecting the terminal is spamming the following message over and over:
"dr…
-
## Bug report
**Issue details**
After loosing video signal, I put the plane in RTL mode and the Plane wasn´t ok - losing speed and altitude.
I have a plane with Ardupilot 4.4.1 with an O3 unit …
-
I can't find any information how to use the baseline feature.
What i'd like to do:
- connect a noise source to the receiver
- save the spectrum as baseline
- use the "substract baseline" feature…
-
### Current Situation
Will rtl_433_ESP work (or can it be adapted) to decode smart meter messages on the ~912MHz frequency range?
This can be done on Windows/Linux using rlt_sdr dongles with the rtl…
-
Hello,
I'm using the Tabular Editor with Power BI Desktop to translate my model in several languages.
When I publish I can see the various languages except Hebrew.
Is there a limitation? If …
-
I was hoping someone could help me out here. I have the Nooelec GOES dish, sawbird and a RTL-SDR dongle in windows with SatDump receiving GOES just fine but when I take my setup and plug it into my Ra…
-
The power company installed new power meters recently so I decided to embark on yet another rtl_433 project. I've been going it alone for more than a week and decided to have the experts take a stab …
-
```
pi@pi:~/heatmaps $ python heatmap.py --ytick 15m 20160823_000001-24M-1700M-500k-30-1430m.csv 20160823_000001-24M-1700M-500k-30-1430m.png
loading
Traceback (most recent call last):
File "heatmap…
ghost updated
5 years ago