-
Need to finish following parts for release:
- [x] UART #18
- [ ] I2C
- [ ] DMA
- [x] Wait svd 0.14.0? https://github.com/brandonedens/stm32l4x6/pull/5
- [ ] Merge with https://github.com/Mabez…
-
**Describe the bug**
When enabled the low power management using `CONFIG_PM`, STM32WL I2C doesn't work with J-Link but sometimes works with STM32CubeProgrammer using `openocd` (not `stm32cubeprogramm…
-
On some boards, such as STM32 boards (and probably SAMD boards too), there are multiple I²C controllers available, typically named `Wire`, `Wire1`, etc.
Currently, this library always uses `Wire` h…
-
I am trying to use backup registers library with stm32f103c8 board under Arduino 1.8.10 with STM Cores 1.6.1 installed. I put the code in the setup() and the result definitely shows that value in setR…
-
Client inherits from Stream but read is declared in Client.h as:
```C++
virtual int read(uint8_t *buf, size_t size) = 0;
```
whilst the parent declaration in Stream.h is:
```C++
virtual si…
-
I started using Meson some days ago, and I can say it's really awesome. I easily converted all of my "native" CMake projects to Meson.
But I'm trying to convert a cross-compilation project and that's…
-
There seems to be a problem with calling pinMode multiple times and using analogWrite.
The following code will fail for me:
```c++
static const int MOSFET = 9;
void setup() {
//ON
pinMod…
-
Hi, in my boards.txt file I am using my own build flags (eg. -DFLAGNAME). Arduino-cli recognises these flags but sets these to their default values (0). How do I tell arduino-cli to set certain flags?…
-
I just came across this code and thought it really cool and found it to work on my 32 bit STM32L4 processor as written against the provided sample data files.
I wondered how fast it was and surpris…
-
When I run the following command in terminal: `rosrun rosserial_server serial_node _port:=/dev/ttyACM0 _baud:=57600`
I get repeated messages:
```
[ INFO] [1549038775.675072157]: Opened /dev/ttyAC…