-
Confirm all variants that need to be supported.
- sx1301
- 1302
- 1308
**Notes**
- Currently using sx1302 chip_id script: https://github.com/NebraLtd/sx1302_hal/tree/master/util_chip_id
- Checking f…
-
- [X] The issue is present in the latest release.
- [X] I have searched the [issues](https://github.com/brocaar/chirpstack-concentratord) of this repository and believe that this is not a dup…
-
Hi!
I recently tried to use SF6 with station based on SX1302. There is a problem with SX1276 based devices that require implicit header mode for SF6.
SF6 and implicit header only work for LoraStd …
-
I am using chirpstack os with a RAK5146 (SPI+GPS EU868) and a raspberry pi. I am using the config for the rak_2287 and it mostly workes. The only thing not working at the moment is fine timestamp. Wou…
-
Hello.
We have a Laird RG186-M2 with SX1301 attached to a linux pie.
We have over 50 of these out in the field and 1 of these units are hanging from time to time with a period of every 3-4 minute.…
-
Currently there are only EU868 preset for Seeed WM1302 on Concentratord. I Already tried to changed channel plan and test on Dragino LDDS75 sensors but doesn't work.
I'm using on SenseCAP M1, It wo…
-
Helium have, in their upstream repos, modified various aspects of both the sx1301 and sx1302 setups.
We should do a full audit of these and determine which, if any, would be useful to pull in here
-
The packet forwarder refuses to start with the following error -
```
sx1302_hal *** Packet Forwarder ***
sx1302_hal Version: 2.1.0
sx1302_hal *** SX1302 HAL library version info ***
sx130…
-
Seeed WM1302 support for USA 915 and other regions that it supports should be added.
Also, support for its RPI Hat card
I currently set RAK5146 option for this card as I believe the Seeed card is…
-
I am getting this error:
```
root@f986d0ed3f2c:/opt/iotloragateway/packet_forwarder# sx1302/util_chip_id/chip_id -d /dev/spidev1.2
CoreCell reset through GPIO22...
Opening SPI communication inte…