-
Has anyone confirmed if this Zigbee coordinator firmware updater image from @walthowd is compatible with ITead’s new “Sonoff Zigbee 3.0 USB Dongle Plus V2” model “ZBDongle-E” based on Silicon Labs EFR…
Hedda updated
2 years ago
-
-
-
$ python3 comm_sbs_bqctrl.py -vvv --dev_address 0x0b sealing Unseal
Opening i2c:1
Raw write: DATA=22 3e
Raw write: DATA=20 3e
Raw write: DATA=22 3e
Raw FirmwareVersion response: 0b 43 07 01 01 00…
-
I would like to react to Hue Tap switches using this library, but so far I didn't found out if this is possible. I've logged the packets my Hue Tap Switch is sending and uploaded a screenshot of the p…
-
Every time we upload code to Beaglebone Black it compiles all the libraries present in library folder and main code in working directory even if we don't modify them. Then what's the benefit of having…
-
*ble.enum BA doesn't connect*
Note: this might be a duplicate to #861 --- unfortunately the releases page https://github.com/bettercap/bettercap/releases doesn't contain binaries for for v2.32.0. S…
-
I've been using your repo on a very old raspberry pi model B v 2.0 running Linux raspberry pi 6.1.21+ with great success. I had to use a USB dongle for Bluetooth, but it worked without a hitch.
I…
-
Hi everyone!
I'm thinking of porting the PJON protocol to ARM embeded devices (in particular the Texas instruments Tiva-C family), however i have never done something like this (porting to a new ar…
-
As you’ve hard wired some of the outputs to be inputs - mentioned in #6 - do you need to have a template in the firmware to stop the FPGA trying to output on those lines? Presumably, you need to repla…