-
thanks.
-
So this is my current list of the things I'm planning on working on (in a very rough priority order)...
1. ~~Create single code base for STM/LPC versions and associated build system.~~
2. Track DC42…
-
Sir, today i started assembling my printer'
first connected Filament sensor to port DLJC, but led in that filament sensor is not glowing
then i checked voltage of pins with multimeter , getting 3.3V…
-
Hi there,
I am using the TMC5160 with a custom setup for driving actuators, I used them quite for a while with different setups and length and everything always worked out well. For a new project i a…
-
### Wiki Search Terms
Motor, Axes, Motor issues, pretty much everything
### Controller Board
6-pack Universal
### Machine Description
Shapeoko 3XXL
![IMG_9752](https://github.com/user-…
-
Hi,
I am using your lib in my Project: https://groups.io/g/TeenAstro/wiki/home
Your are mentioned has contributor 🥇
Many user has requested servo motor support. Trinamic has a board that is int…
-
Hello , did somebody tried to use this library as motion controller mode.
Meaning that sending speed and destination via SPI and chip has full control motor ?
thanks a lot.
-
On the board that I designed and uses stm32F4 there are 3 spi hardware.
The TMC2130 that I use are connected to a dedicated spi hardware.
The TMCStepper library relies on the software spi or the Ard…
-
What is the best way to interface with closed loop stepper motor?
Currently I working on simple design for closed loop stepper comntroller that can be very cheap but will its work. So basicaly it i…
-
#### Description
After upgrading the console would lock up after connecting; unlock command and then it seemed to hang. Power cycled controller and downgrade to 1.9 = fixed.
Rolling back to 1.9…