-
For some time, I have been looking into ways of improving the current resonance test offered by Klipper, which runs vibrations of different frequencies and measures the printer response. I had some ri…
-
I'm using BigTree Tech 2209s. The User Manual for this 2209 informs to use the solder jumper to enable UART on the driver pin for TX and a 1k ohm resistor on that same pin for RX. I have a limited n…
-
try to use GRBL-Plotter with my Fluid-NC FW on a MKS DLC32 HW
i use a old LPKF PCB Milling Machine C30 for that.
when i move the x or y axis i don't see ToolCoordintates changing they all still 0.…
-
i im having a issue with arduino paths being to long and dont let me compile Marlin-bugfix-2.0.x-new-layout firmware there was new arrangments on marlin and seems that now there is a problem in window…
-
hi,
im using your library for spi fine, but i have now connected it up in uart mode but the position when running your tmc5160_uart example only moves back and forth to 0-56 not 0 to 200, i have test…
-
It seems on ESP32 files can be uploaded on local FS, but no files but preferences.json can be downloaded
Like the webui theme files.
![download](https://user-images.githubusercontent.com/8822552…
-
I have a BIGTREETECH SKR PRO V1.2 I am trying to get grbl running on.
I have tried to build using the instructions on platform.io. All the configured environments build expect for the `btt_skr_pro_…
-
Is the Biqu SKR Pico currently supported?
https://www.biqu.equipment/products/btt-skr-pico-v1-0
-
This project concerns itself with the **protocol**. Where do we want to have concrete implementations in programming languages?
My idea:
- This repository contains as well the protocol definitio…
-
### Bug Description
The used library cannot be installed when build the project, due to 404 status.
`TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip`
### Steps to…