-
Hi Stef,
Great work, i would love to ditch the ATMEGA 2560 and run this on a Wemos D1 mini.
Is this possible, and how to connect the RFLink board: https://www.nodo-shop.nl/nl/41-rflink-433-mhz t…
-
THIS IS NOT A THREAD TO ASK FOR HELP! USE GITTER CHAT FOR HELP
Hi guys, I would like to use this area to list unit types that are know to work with this library.
Exact number(as in tonnage) not ne…
-
### Device
D1mini with soldered on bh1750 and the mmwave sensor
### Version
Current dev branch (3a34f06c3f26bef1338ec81a7ce5d1af4b5b7559)
### Question
Hi all :)
My usage of espurna in …
-
### The problem
When flashing a non-16 MB board the second time you get an error saying the board was flashed with the wrong size.
ERROR Error binary size: Error: ESP has been flashed with wron…
-
Indoor unit: FTKS25DVM
Board: esp8266 Wemos d1 mini
When using the default sample configuration with GPIO1 and GPIO 3 (TX and RX), I get timeout errors in the exact same manner as this issue #15 .…
-
Hi! I tried to use the MPU6050_DMP6 in the arduino mega, and it works perfetcly. But when I tried to use in the wemos D1 mini, or even in NodeMCU, it always throws an exception. I used the code as is,…
Girum updated
2 years ago
-
Hi,
Sorry, this is not an issue - more of a curiosity. Have you tried to use this on the wemos triple(with two relays and one wemos)? Would be a nice space saver - in my setup that is.
Been runn…
-
Hello Hideaki Tai,
I tried to run the WiFiMQTT example on a Wemos D1 and also on a Wemos D1 mini.
it did not compile with the "#include " it seems to be not up to date for esp8266, so I replaced…
-
Hello all.
I get quite a few invalid conversion errors when compiling.
Arduino 1.8.19 IDE
Wemos D1 mini R2 (Default settings)
ESP8266 Community version 3.1.2 installed in the boards menu.
…
-
For my BPL I am using a Wemos D1 mini. I am facing the following problem. When I use a mechanical relay in the form of a wemos d1 mini shield I can only use the port D1 (tested without bpl, just a si…