-
### Subject of the issue
Massive ping spikes and a bad WiFi performance (
-
Hi and many thanks for the great component!
As soon as v4 was released, I migrated my configuration to it. Back then I noticed that no readings from sensors were ever received.
I rolled back to …
-
Tree: halium-7.1
- [x] Create manifest
- [x] Boot image and system image build successfully
- [x] Device boots into rootfs, `usb: Manufacturer: GNU/Linux Device` appears in `dmesg` on host.
- […
-
I've tested the motion sensor hardware and it's working fine, when I'm still in SteamVR, or just turning my head, the picture is fine, when I start moving, the picture gets laggy and jitter, and I'm s…
-
I was building this for my SteamDeck and noticed that during compiling, it was building things like drivers for Wifi Chipsets the Steamdeck doesn't have, as well as things like Nouveau.
Would it ma…
-
### Board
ESP32-Wroom32 (ESP32 Dev Module)
### Device Description
Module on breadboard
### Hardware Configuration
DHT20
### Version
v3.0.1
### IDE Name
Arduino IDE
### Op…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
I am able to add my Daikin HP via Onecta, and I've added `Daikin Onecta` integration to my HomeAssistant, but I cannot add this integration.
Specs:
Altherma Gateway Model Info BRP069A78
It does h…
-
### Board & Hardware Description
I'm using my own ESP32-S2 board, but probably any ESP32-S2-based board with USB would reproduce this. (I can pick up a generic dev board and try there if desired.) …
egnor updated
2 months ago
-
### Describe the bug
Setup:
- Raspberry Pi 5 with original power supply
- 64GB microSD card SanDisk Extreme Pro
- LibreELEC 12.0.0 release image
- tested with two different wifi USB dongles
* …