-
Hi,
I noticed that both steppers get very hot when idle. Vref on the A4988s was > 0.9 V, which I'm sure isn't necessary for this scanner. I reduced it to 0.5 V which is plenty, motors stay cool.
…
-
[test Stepper.txt](https://github.com/waspinator/AccelStepper/files/4405305/test.Stepper.txt)
Hi, I'm using the library with a Stepper driver (only use Pulse pin and Dir pin).
I'm running an exa…
-
On a T-Rex3 I tried to enable LIN_ADVANCE but as soon as K > 0 (even 0.01) the extruder stops moving. disabling lin_advance everything works as intended.
Anyone had luck enabling linear advance?
cubiq updated
5 years ago
-
Hey, I found your github with this program, just now I'm trying to make a 3d printer based on esp 8266 and all this on Nema 17 stepper motors. I would be glad of any help, whether it's an explanation …
-
Hi All,
I have read through multiple threads but it seems that I'm reporting something new/unseen so far.
My Setup is Eleksmaker Mana SE v3.2 + grbl1.1g, I have upgraded X - Stepper Driver, and …
-
имплементируем тесты для всех функций.
-
Hi all
First one... sorry for bad english:)
My printer is made from
SKR 1.3
XYZ - TMC2208 UART
E - A4988
BLTOUCH
TFT24 v1.1
Marlin Version 2.0.5.3
I have got some issues with configurat…
-
Can Allegro A4954 be used with cmdrardunio?
I can buy a dual H-bridge shield from www.freetronics.com.au
-
Board MKS Robin Mini has stepper drivers A4988 soldered on board but there are no trimmers to set VREF voltage for these drivers. VREF is generated with PWM by CPU. I cannot see any reference to VREF…
-
I have S109 drivers based on TB67S109AFTG. They need vcc=5V.
May I set VLOG JP101 to 3-2, (FD_5V) with Due ?