-
Hi
I'm having trouble getting an external amplifier board (E3D PT100 Amplifier INA826) to work on the Octopus V1.1 board with RRF.
It looks like I can't desolder the chip from the E3D board and …
-
For the CP-processed mosaic z-band images, Rongpu's construction of nightly template skies pick up very little un-subtracted structure in the sky other than amp-to-amp corrections. We could consider …
-
Hi again,
as I continued with my experiments I needed to test if some materials will block RF and how much.
In material datasheet I have found that they are using two probes for test, so I have…
-
The properties of the symbols for installations (land symbols) should be improved, since not all amplifiers can be filled in according to 2525c or 2525d:
![grafik](https://user-images.githubusercon…
-
Hello! I'm attempting to spawn an area effect cloud where the projectile hits, but it seems amplifier and show particles aren't supported with cannons. (I could live without show particles, but ampl…
-
Jake:
Would it be possible for Pychron to automatically mark and reject analyses where a beam exceeds the saturation value of an amplifier? These are almost always cases where 40Ar is > 50xx count…
-
```
Further description of the feature you'd like to see:
Damage Amplifier could be greatly improved if cvars could control Range and
Damage Boost %.
Is request to fix another bug?:
```
Original …
-
We need this amplifier for AEGIS Ion trap control.
At lest 32 channels are needed so we will use Fastino and add 4 amplifier cards on its right side connected using flat cables.
additional EEMs will…
-
Different EEPROM files are required to achieve best performance depending on the power amplifier (PA) and low noise amplifier (LNA) type which, as far as I understand, can be ePAeLNA, iPAiLNA, iPAeLN…
-
See discussion [here](https://community.lsst.org/t/2017-04-28-visualization-meeting/1811/3).
Use case:
Examination of multi-amplifier CCD images before calibration (e.g., on hardware test stands.…