-
Hi Peter,
line 150 or so:
should "_pmu->setChargerConstantCurr(XPOWERS_AXP192_CHG_CUR_780MA)" for AXP2101 be:
"_pmu->setChargerConstantCurr(XPOWERS_AXP2101_CHG_CUR_800MA);" ????
maybe th…
-
Is there an equivalent library for a battery powered ESP32-S3 to the AXP202 library for the TTGO T-Watch.
Currant usage could be measured without a device, such as an INA219 module.
The getBattCharg…
-
I am new user for T_BEAM. I bought the LILYGO instead TTGO, and is not working.
The display don't show nothing, so I can't understand if the problem is in the visualization, or the board is totally …
-
I have a problem: Is it true that the first time it starts, the DCDC1 voltage will be 3.3 Vdc according to section 7.6 of the datasheet I attached? How will the starting order of the voltages be confi…
-
I uploaded in the LILYGO T_BEAM433 MHz.
The version of the board is a mystery:
- the white label say '2ASYE-T-BEAM MODEL V1.1'
- the text on PCB close to the antenna say 'AXP2101-V1.2'
On the disp…
-
Hello,
The new Lilygo T-Beam boards are coming with a new power management chip. In place of the AXP192 is now coming the AXP2101.
This is causing the APRS LoRA Tracker to malfunction.
 working conditions using the batter and a solar panel.
If I understand correctly the behavior of the PMU if we enter the cond…
-
Can you help me to integrate the board 1.2 with axp2101
https://github.com/kizniche/ttgo-tbeam-ttn-tracker
-
Hello,
First of all, thanks for the amazing work.
I have a Heltec LoRa v3 board, and the iGate function is working as expected. However I can't get the internal battery voltage shown in the beacon…
7deve updated
7 months ago
-
hi. his this camara a paper weight?
[125]HELLO! BOOT0 is starting Nov 14 2019 20:01:31!
[130]BOOT0 commit : 81c18ee
[133]board init start
[135]set pll start
[138]set pll end
[139][pmu]: bus re…