-
Hi
My inverter is an Axpert 5kva , I am using the USB connection- followed instructions - running docker on Pi3.
All sensors now detected on HA, but no values returned. I am not familiar with pro…
-
Hi
Any idea why my battery charge current is showing 0
sensor.voltronic_battery_charge_current
![image](https://user-images.githubusercontent.com/24844893/74259535-b88fec00-4d00-11ea-97e0-a3db839…
-
I used to have a couple of dashboards reporting PV power produced / Power used in house and surplus fed back into the grid.
So I wanted to make sure all is up to date in the administration Menu op…
-
Dear John!
Sorry for opening an issue just for communication. I was not able to find your email address in the setup.py file.
A month ago I started to write exactly the same software you have al…
-
i am running it for vmiii successfully but dont have a BMV. I am looking to modify Output Source Priority state based on the battery voltage either provided by axpert (BATT_V or BATT_CAPACITY_PERCENT)…
-
I was able to successfully run the docker project on raspberry pi 3 A+ after latest fixes.
I am even able to execute the raw commands and getting ACK from the inverter and the mode also changing succ…
-
Hi,
The software is perfect and it works flawlessly on Voltronic Axpert VM & VM II Inverters. But it is unable to connect with Voltronic Axpert Infini 10kw inverter.
Kindly guide is it supported…
-
SolPipLog Working perfect on Axpert solar and VMIII Inverter. Now i am trying to run this with Schneider SunEzy 600E Solar inverter.
Please help me so that i can run this software with Schneider Sun…
-
Hi,
I’ve a problem with SolPipLog as he doesn’t seem to recognise two inverters connected in parallel. He only seems to detect the one connected to the USB port with a lower number.
I’ve already tri…
-
Hi,
Error: “pip not found on /dev/ttyUSB0” )
The same config is working fine with version 1.4.8.
Env: Raspberry pi3, RS232, Axpert 5KVA
Thanks in advance
![capture solpiplog150 nok](https://user…