-
Thanks @looxonline for your awesome work.
I just noticed in TFTFirmware-2020-12-06.zip (all branches) the Firmware File for the Touchscreen is called BIGTREE_TFT35_V3.0_E3.26.x.bin not BIGTREE_TFT3…
-
I am running an skr mini e3 V2 with a stock ender 3 pro hotend and raspberry pi with klipper and mainsail. The printer was working fine like this. Yesterday I noticed both the bed and hotend immediate…
-
I am planning on replacing the mainboard for my Creality Ender 5 Plus with a BTT SKR Mini E3 V3.0, and I am having extreme difficulties figuring out how to configure the Marlin Firmware to work with m…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I enable LASER_FEATURE and LCD laser Menu on my Bigtreetech (BTT) Octopus Pro V1.0 boar…
-
Attempting to use a touch screen with the cb1. They say to change the config.txt file which is never created on the current images. Adding it manually doesn't enable USB either.
support said:
H…
-
### Description
In the marlin configurations repository under ~~Ender3~~ and Ender3v2, the configuration_adv.h has the E0_AUTO_FAN_PIN incorrectly set to -1 (disabled) where it should be PC7.
I …
-
I bought a 12v 15A powersupply and skr v1.3 board. But in my power Supply its output voltage is only 11.8v . Can i run my skr v1.3 mainboard from this power #237
![15815128983309216939006031158104](…
-
I replaced the silent board on my ender 5 with a SKR MINI E3 V2.0 and a TFT 35 V3.0. I installed the firmware from (https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/firmware/V2.0/…
-
When attempting to compile current Marlin 2.0.9 for my Ender 3 Pro w/ SKR E3 Turbo mainboard to account for adding BTT 12864 screen, autobuild marlin in VSCode displays an error:
In file included fro…
-
I installed the BTT SKR 1.4 Turbo and have been able to print for a while. Recently the extruder would stop mid print. X, Y and Z would keep going and heating was kept on. After stopping print extrude…