-
**Describe the bug**
It will fix ha graphs and storing
a) mqtt-io graph:
b) correct graph:
**Config**
```yaml
sensor_modules:
- name: wc_climate_bme280
module: bme280
…
-
Your module appears to cause the i2c scan to slow down significantly if the sensor was found, but later is not found. This should not happen, if the sensor is missing or disappears, the scan should s…
-
**Describe the bug**
When enabled the low power management using `CONFIG_PM`, STM32WL I2C doesn't work with J-Link but sometimes works with STM32CubeProgrammer using `openocd` (not `stm32cubeprogramm…
-
Hi, thanks for your code. I'm having trouble compiling this, is this an issue?
If not maybe you can give me a hint please!
```
Toolchain path: /Users/dvd/src/esp/xtensa-esp32-elf/bin/xtensa-esp32…
-
Compiling the code in Arduino IDE result in the following error:
" no matching function for call to 'BME280::ReadData(float&, float&, float&, bool, int)'"
I had downloaded the last BME280 libra…
-
Hello,
i got different errors in arduino ide 1.8.9
i have install the necesary libary's but get the following error's
Arduino: 1.8.9 (Windows 10), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, …
-
hi i succefully uploaded the example from your website withe combined readings but i always get an i2c error
.⸮EO⸮v`MM⸮4C8I⸮⸮⸮H(⸮⸮⸮⸮BME280 data to CCS811 for compensation.
Problem with CCS811
I2C…
-
Mast likely due to this breaking change:
PMSx003 add relevant device and state classes to default config [esphome#5633](https://github.com/esphome/esphome/pull/5633) by [@wheimbigner](https://github…
Dinth updated
2 months ago
-
This is my first time doing something like this, and I have no experience in this area. I only have basic programming skills.
I am using bme280. But I have not been able to configure it properly.
…
-
Would you please consider supporting an TCA9548A I2C 8-channel multiplexer (e.g., [SparkFun Qwiic Mux Breakout BOB-16784](https://www.sparkfun.com/products/16784)) in order to enable more than two BME…