-
Thanks for the library. I'm working on getting an accurate pressure reading from my BMP280 and it still seems to be about 6,000 Pa off from the current pressure in my area. I'm using the weather measu…
-
Hello,
Congratulations for your very useful library! I would like to ask if you are planning to add support for the BME280 sensor?
Thanks,
lg007 updated
3 years ago
-
Hi,
I've built my own EDtracker out of Arduino Pro Micro clone and this MPU 9250 board:
https://www.hotmcu.com/gy91-10dof-mpu9250-and-bmp280-multisensor-module-p-341.html?cPath=7_37
(It's the versi…
-
@peijiajames
[BMP280](http://lxr.free-electrons.com/source/drivers/iio/pressure/bmp280-core.c#L105) iio driver contains "oversampling_ratio", can support the configuration from iio node ? For e.g: b…
-
Le BME280 permet de mesurer la pression, la température et l’humidité dans un seul module et peut être utilisé via SPI ou I2C.
https://fr.aliexpress.com/item/GY-BME280-3-3-precision-altimeter-atmos…
-
Using my breadboard build and replacing with the new offbrand, but highly rated SD card module. Worked for 12 minutes using the source code from my original sketch, then couldn't see the SD card. In f…
-
board:
holybro kakute f7 v1.5
px4 version:
1.11.3 stable
qgc version:
v4.1.1
I flashed px4 firmware to kakute f7 board followed this tutorial:
https://docs.px4.io/master/en/flight_control…
-
Hello,
i would like to integrate a BME280 in my Arduino Code.
The Manager show there are some BME280 libarys. One is your.
What does your libary better than the other ones?
-
Hi there,
The detection script had a problem with the detection of the orange pi board.
With the modification of the board.py file at line 612 "orange pi" => "orangepi" all come back to normal.
…
-
I am looking at this tutorial and I don't know how the dotted graphs were made. What exactly is the format of the magnetometer to print to serial monitor and get that graphed data? Any example code?…