-
- Didn’t have a cable to connect keyboard and mouse so I used [this ](https://www.dirtyoptics.com/get-access-to-your-pi-zero-w-without-a-keyboard-mouse-or-monitor/) to connect using ssh
- Installe…
-
let the controller mapping the 4 chassis motor.
for example, left rocker push means go forward, left rocker pull means go backward.
due is 8pm Sun.
-
Hi,i build the newest openbmc version for meta-s2600wf(commit ID
c549f3a7f5496ec3b54ed65c8b4d8351db10995e),which use x86-power-control version f61ca6fdcc52beba485e014b5fad38a9e9a555ad. But when i…
-
The KGPE-D16 has chassis intrusion headers on the board, as briefly outlined here: https://github.com/lampmerchant/kgpe-d16/blob/main/w83795g-intrusion.md
We should look into how this can be implem…
-
show chassis output description indicates "QFX3500" hardware instead of QFX10K
vagrant@vqfx-re> show chassis hardware
Hardware inventory:
Item Version Part number Serial number De…
hmali updated
7 years ago
-
**Description**
QoS test to verify all ports to all ports connectivity (full mesh) . Traffic sent on all priorities.
The purpose of the test is to verify that each port in the system is abl…
-
I was looking over the calculations in SwerveMath.calcMaxAccel(), and I think there might be a problem in the logic. When you check the reference wheel based on the angle, not all the wheels are sele…
-
In our enviroment, we using ovn for openstack network. I create a load_balancer on logical router(named share_router) to forward ssh port to a lsp(as knowned as a vm1).
```
()[root@ovn-tool-0 /]# …
-
Currently, there are two pairs of movement functions.
`moveDistance`/`moveDistanceAsync` and `turnAngle`/`turnAngleAsync`.
These each set the target of the chassis relative to current position then …
-
#### Description
In Database Config DB the KEY "SWITCH_CAPABILITY|switch" is missing the entry for ORDERED_ECMP_CAPABLE..
#### Steps to reproduce the issue:
1. Login to the database contai…