-
I have set up four roaming zones that I filled by selecting (sometimes the same!) "Add DMR channel". This fills the "Roaming channel" list automatically. When initially setting up the zones, everythin…
-
The radio is very similar to other TyT/Retevis radios e.g. TyT MD-UV390. To this end, it is very likely that only the codeplug must be verified. As the binary codeplug can be extracted from the CPS fi…
-
The Anytone 878 has seperate settings for
Menu->Settings->Voice Functions-> "DigiMic Level" vs. "AnaMic Level"
I think qdmr is reading and setting the "AnaMic Level" parameter with Settings -> …
-
Device: Any Tone D878UV II Plus
Firmware Version 3.01
Hardware Version 1.10 GD
Radio Data Version 1.00
Reading a codeplug from device works flawlessly. Transfering user.json to device is also wo…
-
qDMR has been a huge quality of life improvement for many of us, however when we need to do firmware updates on our radios we're still having to go back to the manufacturers' software to perform this …
-
The TYT UV-390 and family use squelch on DMR channels. QDMR seems to reset the squelch every time when writing to the radio to zero. It would be nice if the squelch value was stored in tytExtension or…
-
Envrionment:
RADIO: AT-D878UV2
QDMR: 0.11.0 built from source
Distro: nixos unstable
Building works just fine, im able to open qdmr, I can read the current code plug from the anytone.
But whe…
-
Building 5b66246 fails for me with the following errors:
```
cd /tmp/qdmr-20230618-35854-12ga0el/lib && /usr/local/Homebrew/Library/Homebrew/shims/mac/super/clang++ -DQT_CORE_LIB -DQT_GUI_LIB -DQT…
-
Often, a channel only makes sense in the context of a zone. On the actual radios, this is not a problem, as the zone name is usually displayed next to the channel name. But inside QDMR, the zone name …
-
Here is what I get from the terminal, any idea I can get better logs? Also I'd love to take a stab at fixing this with some help
`gigawatt@mesquite:~$ qdmr
Debug in src/application.cc@841: Set ico…