-
Hi, is it possible to add the Field % on the Alternator detail screen. Now I see you have added the RPM and Temperature which is perfect. Field% would be even better.
-
The fixedReserve feature in MOST and MATPOWER allows setting a fixed reserve requirement in power units (i.e. in MW).
The system can be divided into zones, and a fixed requirement can be set for each…
-
GenX has been constructed to operate on a 1 hour time basis.
It should be possible to unstuck this in order to allow, for example, 5, 30, or 120 minute timesteps.
This would probably also be a g…
-
One of my steps has an unconnected input, due to an `extend_inputs` command in the construct.py without an accompanying `g.connect` for the step that is supposed to supply the input. In the example be…
-
Looks like IC6 pretty much exploded.
Crate has been running for months, and w…
-
### Problem description
With the default ZHA configuration the Device delivers the wrong values for Current and Energy deliverd for both ports.
The Factor seems to be 3600
### Solution descriptio…
-
when testing the package by running 'test PowerModels', I get the error bellow. The program crashes at soc distflow pf_bf at 3-bus case. Below is the full code.
I am running this on MacBook Pro with …
-
Hi, is there docs for setting up a new process?
-
Make the rprog (voltage or current) honor the Vset/Iset limits.
In normal operation I always set things low to avoid magic smoke. With prog currently the voltage limit is completely off now. Looki…
-
Hi and thanks for your work so far. I am using this addon to communicate with my Alpha-ESS battery system. I am trying to understand what each of the data items mean. Do you have a description of e…