-
## What is the feature?
so. from time to time i hav a issue with a sensor getting dropped by the zigbee network/controller. and instaed of just ignoring it. the bette thermostat just stops working al…
-
Hi, I built the ESP32 board using [this schematic ](https://github.com/Kaldek/rat-ratgdo/blob/main/schematics/ratgdo%20open%20source%20ESP-32_schem_v6.png) and connected it to a Esp32 using the GPIO p…
-
Hi
since the core update 2024.7.0, I no longer see mushroom chips. if I change vertical-stack-in-card to vertical-stack or stack-in-card the mushroom chips show fine.
![image](https://github.com/ofe…
-
All my sensors are displaying as "Open" when the app shows them all as "Closed".
I did change some settings on the system itself a while ago, not sure if it's related, a setting I need to restore? …
-
Hello,
The motion sensor is certified, only the battery is 200%
If I search a little further about the Tuya devices and the battery status, it seems that it should work. Can you take a look at t…
-
One absolutely amazing thing would be if you could provide a sensor with either what's the load weight or whether washer/dryer's door is open. I would love to be able to setup a notification to remind…
TeoTN updated
1 month ago
-
Hi
battery status is missing from door and window sensor 2
![image](https://github.com/mrui…
-
I have set the thermostat with keep_alive to control a shelly device. On the shelly I have set a timeout of 10 minutes and the keep_alive is set to 1 minute. The shelly device turns off after 10 minut…
-
### The problem
Just purchased some Yolink LoRa door sensors and a hub and installed the HA Yolink integration. Everything went well and all the sensors were detected, but not of them are updated in…
-
I have a side-by-side Samsung fridge with a USB wifi dongle connected with Smartthings and some sensor values only show "unknown" in HASS.
Fridge model: Samsung RS8000 (RS6GN8222S9/EG)
Wifi dongle: …