-
Hello,
Could you tell more about where is the regulator to remove?
an other point, you tell about 2,7uA, but the photo show your multimeter with 2,7 on screen, but volts are selected...
so I think …
-
[EDIT: the board is Feather M0 Basic Proto]
- Arduino board: Adafruit Feather M0 Basic Proto
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.5
- List the steps to reproduce…
-
The Error
`
In file included from D:\Projects\iMatch\Firmware\arduino-1.8.19\portable\sketchbook\libraries\ExpressivePixelsArduinoPlatformLibrary/EPXPlatform_CStorage.h:5,
from D…
-
Hi spuder, thanks for this awesome project, I've forked your repo and configured 2 variants, one for an Arduino Pro Micro connected to a Neopixel ring light, and one for a Adafruit Trinkey.
All work …
-
The [PlatformIO build instructions in the README.md](https://github.com/adafruit/Adafruit_Wippersnapper_Arduino#platform-io-build-instructions) could use some improvement:
1. Test the PlatformIO bu…
-
**Describe the bug**
Reporting this on behalf of [WLED](https://github.com/Aircoookie/WLED) project where we want to add support for UCS890x chipsets. Even though WLED does not yet use 16-bit interna…
-
Hello noob here. I was wondering if the newer ESP32-S2 board was supported ? Has anyone tried it and is the installation process the same as the regular ESP32 ? I figured if I was going to try it bu…
-
If NeoPixels are created without specifying a `bpp` or a `pixel_order`:
```python
pixels = neopixel.NeoPixel(board.D18, 8)
```
then this would get used:
https://github.com/adafruit/Adafruit_Circu…
-
On M4 feather Express, I get a REPL output of
```
code.py output:
Traceback (most recent call last):
File "code.py", line 34, in
ValueError: D11 in use
```
My Circuitpython Code is :
``…
-
### CircuitPython version
```python
Adafruit CircuitPython 7.0.0 on 2021-09-20; FeatherS2 with ESP32S2
```
### Code/REPL
```python
import time, gc, os
import adafruit_dotstar
import board
impor…