-
## Problem/Symptom
The SSH connection test succeeds which kicks off the nornir connection to transfer the image via TFTP, the switch crashes shortly thereafter.
## Details
2960L-16TS-LL switch …
-
**Description**
When running or stopping containerized processes, Docker is taking a really really long time compared to running the same processes without Docker.
The time spent seems to be ver…
-
> Also on the topic of Julie Berry, they do the announcements on Merseyrail, so that could be a new announcer. There are some differences between the announcements on the Class 507/8s and the new 777s…
-
Unsure if this is where to leave such an issue.
I tested Proton out with The Elder Scrolls V: Skyrim Special Edition and while it works, seemed to have okay performance the NPCs didn't seem to have…
-
**** Development environment ****
- AIR SDK : 33.1.1.575
- Starling Framework : 2.6
- android:targetSdkVersion="30"
- android:hardwareAccelerated="true"
- \true\
Error reports like the attac…
-
with SB2240 after 20/30 minutes of printing I get the error 'tmc "extruder" reports error : GSTAT: 00000004 uv_cp=1 (undervoltage!)
(Ldo nema 14 pancake run_current: 0.65)
both motor and board are…
-
After the mobile phone is connected to the ESP32's WiFi, I use the ESP32 to ping the mobile phone. In the case of no interference and close distance (in a shielded box), I found that the ping delay is…
-
I think we should discuss whether or not to use xarray as the common interface for all of the benchmarks we evaluate as part of this project. There are pros and cons to using/not-using xarray. I bring…
-
Previously wifi was usable in station mode with disable_ht=1 and disable_vht=1 set. Now, after recent commits (i'm on fd892bc033fbfad7b1a5bcba1432709a74327a1e), it crashes immediately after connecting…
-
As with [the Radxa CM3](https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/327), I would also like to test Pine64's [SOQuartz](https://wiki.pine64.org/wiki/SOQuartz) with some CM4 boards,…