-
### Board
Sparkfun Thing Plus
### Device Description
Just the breakout board without nothing (except oscilloscope probes on 16, 17 and gnd) on it and connected to the computer via usb
### …
-
With tag [2024.09.12-1](https://github.com/efabless/caravel_user_project/releases/tag/2024.09.12-1) (which incidentally, at the time of writing, is the same commit as the more-recent [2024.09.13-1](ht…
-
https://data.dnb.de/opendata/ currently contains 166.056 Mappings from GND to other vocabularies. We only have 43.396 of these as of 2016 (Project MACS).
Would also solve #40 (but only updates ever…
-
Recently purchased some Gosund WP3s from Amazon to flash over to Tasmota.
![PXL_20240905_014907760 MP](https://github.com/user-attachments/assets/9b51f129-bda9-429d-b2ce-7529999dc08f)
I took one o…
-
Your design is really fascinating. I want to make one myself.
In terms of wiring, I'm a little unclear how the second sensor and the switch connect to the pins of the main pcb.
Can you provide a cle…
-
Apple-Airtag clone with ST17H66 on Aliexpress (https://www.aliexpress.com/item/1005004495296995.html)
Runs with Open-Haystack-App with no problems.
The minimal assembly of the pcb is interesting…
-
I`m using esp32 devkit v1 and P10 WO (single color) andmain solution is downgrading esp kernel to 2.0.2 version. On 2.0.14 ver CLK LAT and DR pin was 0V.
![image](https://github.com/Qudor-Engineer/DM…
-
Hello! I'm currently experimenting with this library in conjunction with a Seeed Studio XIAO nRF52840 (Sense) board. However, I've observed a low data rate when transmitting data via the serial port. …
-
Hi,
I have an ESP32 from node mcu (see the figure below for the pinout and the board specifics.
I think the pinout is not exactly the same as what's mentioned in the readme. Is my understanding…
KASR updated
3 months ago
-
Hi there,
I'm trying to compile the firmware for the ESP32-C3 and a SX1278 (my goal is to make the cheapest RNode possible)
![image](https://github.com/user-attachments/assets/64e8ae6c-f71f-47ae-845…