-
### The problem
When viewing water_heater.set_temperature while creating an automation or in Developer tools, attempting to set a value above 100 results in a red underline and a validation error "Va…
-
Regarding the OTA-update command.
Is there an list/overview of avaialble firmwares with corresponding urls?
General about updates:
Does the heaters auto-update to the newest version if they are c…
-
# 796. Minimum Light Radius
## 入选理由
暂无
## 题目地址
[https://binarysearch.com/problems/Minimum-Light-Radius](https://binarysearch.com/problems/Minimum-Light-Radius)
## 前置知识
-…
-
When using e.g. VR32 for connecting one eBUS to another and providing access to a single device in the second bus on a dedicated address on the first bus, the communication timing is no longer specifi…
-
So I have a new board that I setup with the firmware powered via USB. When I changed over to normal power (took out the jumper) the board powers on and seems to be working fine however the HE0-HE3 ar…
-
Hello, I am trying to control a thermistor for the inside of the machine, I have installed the thermistor in T0 but klipper tells me the following after adding the line to my klipperExpander.cfg file
…
-
I have a Octopus V1.1 which let out smoke and now heaters are shorted on.
is there a circuit schematic or part number for this component to replace?
![IMG_2948](https://user-images.githubuserconte…
-
Both of these applications should make use of the entire Instrument Framework. Right now only TC uses Remote Control SMO subsystem to enable remote control of the heaters. The full stack should be imp…
-
- [X] Order parts
- [X] Receive parts
- [x] Wire up heaters to see how they work
- [x] Decide whether to order more
- [x] Try breathing through a heated mask
- [ ] Safety?
- [ ] How could this b…
-
https://github.com/strawlab/Miriam/blob/main/Programs/Serial_003/Serial_003.ino#L264
`computePIDs` calls `PID_MIDDLE.Compute()`, which has a chance to overwrite `Output_MIDDLE` variable, before it …