-
## Todo
- [x] Add the setting to hub4control
- [ ] Add the setting to gui-v1
- [ ] Add the setting to gui-v2
## Background
In a system with both a Multi/Quattro and PV inverters, and wher…
-
To operate the inverter from the main FSM, we need the pod operation program running on the main Raspberry Pi to communicate with the inverter control running on the Pi Pico. We can use serial communi…
-
Hey,
i've set everything up, but don't get any readout from UART.
I think it might be related to the foxess firmware version.
what is weird is, that i dont have a foxess wifi dongle but an "ana…
-
**Github username:** @erictee2802
**Twitter username:** 0xEricTee
**Submission hash (on-chain):** 0x6c3654a96efcab552ea0dd736c522dc6b71b5e40e356872ad92c506a78e7cbc7
**Severity:** low
**Description:*…
-
We should likely move away from the bootstrap solution and instead create a settings file in json(?) this could accommodate more settings than the inverter also (possibly even the registers of the inv…
-
Today my inverter was offline for many hours (9:00-18:00) and I noticed some interesting behavior:
When the connection is re-established, the inverter not only sends its current data every 5 minut…
-
Is it possible to delete or reset the "Yield Total" score? If I change the Yield Correction at inputs, it looks wrong.
And: Is it possible to unlock the HM600 to 800W like an HM800? Online, some gu…
-
Hello,
Do you plan any support for Growatt Inverter support via RS 485 ?
-
Hello
Thanks for this great integration, its awesome.
Noticed this today. Apologies if it's logged already, or if its an error on my side.
```
2024-07-02 13:52:43.614 WARNING (MainThread) [homea…
-
In my setup I don't have a DTU to control my HM800 inverter. My 4 panels are directly attached to my SF Hub 2000 with 1 AB2000 battery.
I understand that using the inverter for output control is qu…