-
this is a continuation of https://github.com/john30/ebusd/issues/891 as it was misplaced there.
the recently [released firmware](https://adapter.ebusd.eu/v5/ChangeLog#20230903) is capable of analys…
-
I was trying this: https://github.com/SpinalHDL/VexRiscv#interactive-debug-of-the-simulated-cpu-via-gdb-openocd-and-verilator
But got the following error, I tried Some way to solve it but it didn't w…
-
```
OpenOCD JTAG (Flyswatter) support would be nice.
http://elinux.org/BeagleBoard#JTAG
Steps necessary for this:
* OpenOCD compatible JTAG hardware interface with FTDI's FT2232 chip, e.g.
Flyswat…
-
```
OpenOCD JTAG (Flyswatter) support would be nice.
http://elinux.org/BeagleBoard#JTAG
Steps necessary for this:
* OpenOCD compatible JTAG hardware interface with FTDI's FT2232 chip, e.g.
Flyswat…
-
```
OpenOCD JTAG (Flyswatter) support would be nice.
http://elinux.org/BeagleBoard#JTAG
Steps necessary for this:
* OpenOCD compatible JTAG hardware interface with FTDI's FT2232 chip, e.g.
Flyswat…
-
Hi in the "Verify Installation" section of the book openocd is started with the interface/stlink.cfg or the /stlink-v2.cfg new boards use a stlink-v2-1 so the correct file is the interface/stlink-v2-1…
-
**Describe the bug**
After a couple of days of trying to get probe-rs to work with my chip Espressif ESP32-C3-Devkit-M1 and JTAG ESP-Prog adapter, I'm now at a point where I can successfully enter a …
-
Hi, I can't find an ATF1508AS-7AX100. Is it possible to use an ATF1508ASL-25AU100 TQFP100 instead, that is the only one I found? Or are there any other IC's that I can use?
-
Examine Target.log have fail result
Warn : [riscv.cpu] Failed to read memory via program buffer
Warn : [riscv.cpu] Failed to read memory (addr=0x0) negative acknowledgment, but no packet pending
E…
-
Hello,
I am trying to update firmware (following the document https://github.com/USIWP1Module/USI_I-NUCLEO-LRWAN1/blob/master/preloaded_firmware/WM-SG-SM-42%20Update%20Preloaded%20AT%20Command%20FW…