USIWP1Module USI_I-NUCLEO-LRWAN1 issues

USIWP1Module / USI_I-NUCLEO-LRWAN1

31 stars 19 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

.

#49 Rynxie closed 4 weeks ago
0
LRWAN1 and NUCLEO-L073RZ

#48 MasterTimAX opened 2 years ago
0
Command to set frame counter

#47 mrerdem opened 3 years ago
0
Power control

#46 tbornon opened 3 years ago
1
Another problem with updating the firmware from 3.7 to 4.0.2

#45 Jezek-David opened 3 years ago
0
Cannot update firmware

#44 KiwiBryn opened 3 years ago
0
Nucleo STM32L476RG compatibility

#43 med-belouaer opened 3 years ago
0
Single channel gateway and settings

#42 Jezek-David opened 3 years ago
0
I-NUCLEO_LRWAN1 update frimware

#41 Jezek-David closed 3 years ago
21
USI_I-NUCLEO-LRWAN1 with STM32NUCLEO

#40 Jezek-David closed 3 years ago
4
Cannot update firmware

#39 jgt922 opened 3 years ago
7
I-NUCLEO-LRWAN1 problem

#38 bekir35 opened 4 years ago
0
Problem with sensors HTS221

#37 Tyluuus opened 4 years ago
3
Module update to 4.0.0.2 fails

#36 KiwiBryn opened 4 years ago
3
Debug USI_I-NUCLEO-LRWAN1 connected to Nucleo L073RZ

#35 sindrevr opened 4 years ago
2
sm42_fw_update_tool_v1.1-1.zip appear to be corrupted

#34 KiwiBryn closed 4 years ago
2
I-NUCLEO-LRWAN1 I can't connect with Tera Term/ Doesn't send uplinks

#33 MilorES opened 4 years ago
1
Join request DR

#32 aliengravy opened 4 years ago
3
Firmware 4.0.x sleep mode kills join status

#31 szumbrunn opened 4 years ago
1
Upgrading Onboard Firmware v2.9 to v4.0.1

#30 adamwilsonCPI opened 4 years ago
72
USI_I-NUCLEO-LRWAN1 Does not answer to join accept

#29 JulienDevillers opened 4 years ago
9
Patches for 1.3.1

#28 Goran58 opened 4 years ago
5
Add DFU image for version 3.7 firmware

#27 hynci117 closed 4 years ago
2
Porting from fw 3.7 to 4.0.1

#26 hynci117 opened 4 years ago
8
How to change the power level of Transmission at sensor and gateway

#25 sriniash opened 4 years ago
7
Create README.md

#24 USIAndyrich opened 4 years ago
0
Problem with end-node application!

#23 VelcoH opened 5 years ago
3
Configuration issues using AT commands with wm-sg-sm-42_firmware_v3.7.hex

#22 pevandenburie closed 5 years ago
2
Can't change DEUI with AT Command

#21 Theo423 closed 5 years ago
0
patch for v1.2.1

#20 pevandenburie opened 5 years ago
8
High current in sleep mode for fw 3.7

#19 hynci117 opened 5 years ago
4
Module hangs after going to LoRa mode after sleep

#18 hynci117 closed 5 years ago
13
Unexpected current draw!

#17 pbecchi closed 5 years ago
15
Can't update the firmware

#16 mvladic closed 5 years ago
8
AU915

#15 evandavey opened 5 years ago
3
Kail debug session disconnected.

#14 akirawk opened 5 years ago
4
HOW TO: Receive manual?

#13 lukblt closed 5 years ago
4
Impossible to update firmware

#12 Manitou02 closed 5 years ago
8
Saving to EEPROM not working

#11 hynci117 closed 5 years ago
2
Can not get a buffer bigger than 4 bytes at the reception

#10 adrienDLCT opened 6 years ago
6
Cannot update firmware

#9 baptiste-cartier closed 6 years ago
35
Patch issue

#8 MalekT closed 6 years ago
14
problem with patch

#7 borombo96 closed 5 years ago
6
Can't use it at all

#6 et1975 closed 6 years ago
15
Reading i2c with AT command

#5 Kranichstein opened 6 years ago
8
Porting to STM32F1xx ?

#4 digidigidigi1 closed 6 years ago
2
sm42_backup doesn't create a backup

#3 OlegZv closed 6 years ago
3
Antenna is connected to PABOOST

#2 rogerdahl closed 6 years ago
1
Hardware Documentation?

#1 awneil closed 6 years ago
24