-
Hello!
I used scorpio in mitgcm model, model resolution is 11520x14580x90. The box rearranger work well. When using subset rearranger(11520x14580x90), the error as follows:
``
PIO: FATAL ERROR: …
-
First reported here: [Pico W ENOMEM error when using PIO - Raspberry Pi Forums](https://forums.raspberrypi.com/viewtopic.php?t=338158).
A program that uses PIO (such as the example code: [micropyth…
-
Heyo, ran into your work on the discord, had a few questions about your work.
1. which gpio pins are turned into USB using this?
2. if you use the usb pio for split, are both devices visible to the …
-
Hi @steveny2k ,
I changed the version of PIO from 0.10.0 to 0.12.0 Dockerfile installed predictionio 12, when i check the status it giving below error. can you please help me out of this issue.Tha…
-
after pio deploy
do
`curl -H "Content-Type: application/json" \ -d '{ "user": "1", "num": 4 }' http://localhost:8000/queries.json`
got
[WARN] [BLAS] Failed to load implementation from: com.githu…
-
Great work much appreciated.
----->>>>>comming to my issue I was able to flash this project
https://github.com/martin-ger/esp32_nat_router/blob/master/main/esp32_nat_router.c
---->>>> but your…
-
Add a PIO config tool that prints out all configuration
information about PIO.
A tool similar to nc-config .
The information in the output could include,
1) Version
2) Features supported (that m…
-
Each time a hx711_t is init'd, a copy of the PIO program is inserted into one of the RP2040's PIOs. It should instead:
- check if the program already exists in PIO memory
- if not, add it
- then …
-
PIO Core Call Error: "AccountNotAuthorized: You are not authorized! Please log in to PlatformIO Account."
-
I am afresher of platformio for gd32. I am trying upload the blink demo to my board, which has a usb to serial ic (CH340N)。
the .ini is:
`[env]
platform = https://github.com/CommunityGD32Cores/plat…