-
The coordinate system and operators were mostly derived while assuming that the coordinate system is right handed, so the Jacobian J is positive. Sorting this out becomes important in tokamak simulati…
-
How i can see the shock waves using epoch by setting flow velocity? can u help me with a simple example?
-
Steps to reproduce:
* Open the project attached [PI_CloneReplace.zip](https://github.com/Open-Systems-Pharmacology/PK-Sim/files/3763193/PI_CloneReplace.zip)
* Clone simulation **S1** to **S2**
* Op…
-
The simple electron pair bounce at a different frequency than expected. The theoretical period is of 14.2 seconds, but the experimental is 10.4 seconds.
```
iter= 1 wp=4.419417e-01 T=1.421723e+0…
-
Inspecting the list of [`BLAST` codes](https://blast.lbl.gov/codes/), I see some have various degrees of overlap with `Wake-T` functionality. More specifically,
* [`HiPACE++`](https://github.com/Hi…
-
please, which version of openFOAM is about this project?
thanks!
-
OK, my hardware is not fully operational, so that may be the source of the issue. Much of what I'm doing at this point amounts to simulation with relays and wires.
I have a 5v relay connected to…
-
Running FBPIC with MPI domain decomposition on CPUs produced spurious fields at the domain boundaries. In addition I've seen a few very high-energy ions with normalized momenta in excess of 10^11. See…
-
# Figure: quantile-quantile plot
The purpose of the quantile-quantile plot is to determine whether the residuals are drawn from a normal distribution.
Residuals are calculated as linear or …
-
The edges of the GPU parallelization are clearly visible on the field and phasespace openPMD dumps here:
[gpuedge.pdf](https://github.com/ComputationalRadiationPhysics/picongpu/files/7474131/gpuedge.…