-
Are you able to help provide onvif PTZ camera control to the OBS Studio camera ptz control plugin project below?
https://github.com/glikely/obs-ptz
It would help a lot of people.
dslat updated
2 years ago
-
The low budget PTZ PoE IP camera does not support Visca over IP or any other protocols. The only way to manipulate the PTZ control is via their HTTP page.
The manufacturer has been contacted but s…
-
I would like to control the Mevo Start PTZ functionality. This functionality is controlled VIA NDI control I believe its the same functionality as the NDI PTZ Camera.
This may not be possible as M…
-
Implied in this would be publishing a TF for the current orientation of the pan-tilt.
-
Hi there, appreciate the good work but I tried to combine this card with some of my switches using a vertical stack card. The card shows the live feed but the PTZ controls doesn't work. The following…
-
When running your OccurrenceManagement function and using the VarelaSample function within it in isolation, I noticed that the function was outputting more points then expected. I think this is to do …
-
The spec is not very clear about how PTZ permission is asked as part of the getUserMedia call.
It would be good to identify how this is supposed to work and specify it as precisely as possible.
This…
-
你好:
请问该项目所用相机型号是什么?PTZ是自己开发的还是基于现有的平台,比如海康的PTZ相机?如果是自己开发的PTZ,能否提供一些建议和参考资料!,非常谢谢!
-
Is it possible to obtain a value (x, y) of the area where motion is detected? I wanted to use that value to move my PTZ camera to the area where motion is detected.
Follow movement.
-
执行日志:
******keep alive
HTTP/1.1 200 OK
Date: Thu, 31 Dec 2020 17:33:24 GMT
Server: webserver
X-Content-Type-Options: nosniff
X-Frame-Options: SAMEORIGIN
X-XSS-Protection: 1; mode=block
Content…