-
Are there any testing signals available that I can transmit with a second RF frontend to test the receiver?
Or maybe a script to generate such signals? I have a RTLSDR that I want to use as a thrifty…
-
I tried receiving rf signals from a sensor of an Alecto WS1100 weather station, but the signal is not display in the serial monitor.
I can receive the code with this rf sniffer: https://dl.dropboxus…
-
I bought a cc1101 that supports SPI mode, but I don't know how to connect it to espboy? I've tried many methods, but it's not easy for espboy to receive RF signals.
-
**Describe the bug**
With 20+ Helm using applications from 10+ different helm repos (which is the reality after charts.helm.sh went away), ArgoCd often hangs in sync state unknown or with a repo add …
-
Situation is a TP-link CPE710 on nightly sysupgrade 20240421 FW. 710 is lan connected via NanoSwitch to a mini-computer running recently updated Linux Mint. Nothing else on the NanoSwitch. Connecti…
-
Hi!
I am experimenting with OFDM on a bladeRF 2.0 xA5 and a 2.0 xA4.
This is a 20MHz LTE signal at 770 MHz with maximum tx gain.
![20M_SDR_blade_rf_0 77](https://github.com/Nuand/bladeRF/a…
-
HW: Rpi3
Home Assistant 2023.10.5
Supervisor 2023.10.1
Operating System 11.1
Frontend 20231005.0 - latest
my configuration
```
switch:
- platform: rpi_rf
gpio: 17
switches:…
-
1) assign read_data1 = (read_reg1==6'd0) ? {1'b0, 32'd0} : {busy[read_reg1], rf[read_reg1]}; //Is read_data1 and read_data2 32bit or 33bit wide??
2) Is busy signal a 1bit or 64 bitwide??
-
Is it possible for you to add smaller sample rates?
For example 0.200MSPS, 0.300, 0.600, 1.5MSPS, 2MSPS ?
This is useful when nearby strong RF signals are present, to keep them OUT.
-
### Short description
The objective is to verify for which TX gain settings the HackRF can transmit a sinusoidal signal with 0dbm of power. The two TX gain controls are RF (0 or 14) and IF (0 to 47…