-
This is fairly vague at this point, but I have been able to reliably lock up my XU4 when doing heavy I/O load to a hard drive plugged into the cloudshell SATA connector. This is on 4.2-rc1-41.
The be…
-
roc-rk3588s-pc has an m.2 interface which both support SATA and PCIe. But it has to modify in dts and recomplie the firmware . Can we support nvme through dtbo overlay or something that don't need co…
-
### ravynOS_0.4.0pre5_f14_6521265220485120_amd64.iso
Attempting to test the Intel GVT-g mediated passthrough on a libvirt VM on Ubuntu 22.04. Booted ISO and it failed with a page fault.
ser…
-
Proxmox is running on Raspberry Pi 5, using an additional PCIe Sata Controller connected to HDDs (working fine).
Goal is to pass through this PCI device to an Open Media Vault VM (for SMART values an…
-
Before reboot, as soon as I activate the plugin - ALL 8 disks are visible:
2x300GB SAS, 2x1000GB SAS, 4x1000GB SATA
It's worth rebooting the server and the OS "unraid" - I see only 3 disks.
…
-
Currently completely wiping an SSD on Linux systems is usually accomplished using `hdparm` and Secure Erase or Enhanced Secure Erase.
Unfortunately hdparm doesn't support many USB bridges so secure…
-
Apologies if I've written too much, but TL;DR = I'm stuck at `Failed to read firmware: unsupported flash type: 7f9d207f`
When I insert a drive into my ThermalTake SATA-USB disk station, `lsusb` rep…
-
```
What steps will reproduce the problem?
1. use QuietHDD with 780G chipset, AMD newest SATA drivers
What is the expected output? What do you see instead?
Error with:
IOCTL_ATA_PASS_THROUGH failed…
-
This is a very interesting board available on [Amazon](https://www.amazon.com/dp/B0B6WQFYC7) because it has 4 power outputs and comes with all the SATA cables and brass standoffs to attach it to the C…
-
Hello,
First of all, thanks for your work, it's awesome. I found a weird problem while mounting the kit using the v 1.0 SATA adapter. It works with the short data wire (the wire used on the adapter…