-
Hi, i'm not sure why this happens but from time to time the SD get corrupted and need to be formatted. The original app still see the cam though and tell me about the sd card. So i need to format the …
-
### Port, board and/or hardware
esp32
### MicroPython version
When using SPI to connect an SD card in a MicroPython environment, directories with Chinese characters in their names are not recognize…
-
Add a control in the GUI to make the SD card writeable when you configure, then set it back to non writeable when done. This will prevent SD card corruption on power loss. WPILIB pi image currentl…
-
### Creating a bug report/issue
- [X] I have searched the existing open and closed issues
#### Required Information
- DietPi version | 9.7.1 master MichaIng
- Distro version | bullseye
- Kernel…
-
### Describe the bug
Cannot change the IMU frequency for 6C in 1.15.0 stable by saving the configuration file to an SD card. Was able to do it with 1.14.0 stable.
### To Reproduce
Create etc/extras…
-
I had the randomizer working just fine. It would crash when I tried to save the settings but I was able to generate it and play just fine. Today, I had to swap to a new SD card and I transfered all th…
-
Hello. I tried to install my Xstation on my PS1. However, after the Sony logo, the screen will go to the memory card screen. Here's somethings of note:
-The blue light is on steadily but the yellow l…
-
I have been working on this, trying to get root shell and possibly RTSP without permanently needing SD card.
Please note that I have firmware V2.10.45, but looking at the squashfs, it seems very si…
-
Hello,
I am doing this project, but it does not use the SD card I used. The web interface shows the memory size as 1Mb. I did not make a different pin connection. I did not change the code.
My pin c…
-
I'm pretty sure the SD card connector in the BOM is not the correct (unusual, vertical) connetor.
I'd be thankfull for hints on where to aquire the correct one.
okelk updated
3 months ago