-
I have not been able to get the UPS working with SKR Mini E3 V2.
When I start a print, it immediately says print halted. I have correctly configured the file as per the manual and other suggestion…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
Compilation with multiple serial ports while having `DWIN_CREALITY_LCD` enabled results…
-
Hi!
I'm try enable hardware PWM on Klipper config To fan0 or fan1 or fan
[fan]
pin: PC6
hardware_pwm: True
And get this error.
> MCU Protocol error
> This is frequently caused by running …
-
I believe that I have all the config.h files modified for my Ender 3 Pro. I will be running the BTT SKR Mini E3/V2 board. I have dual axis Z steppers, and a much bigger than stock build volume. I have…
-
### Description
Can't send file by esp3d. M28 command not working. SKR MINI E3 V.2.0 + TFT35 E3 V3.0
Error:No Checksum with line number, Last Line: x (where x is a int value)
### Steps to repro…
-
**Is your feature request related to a problem? Please describe.**
It is a bit time consuming to locate previous file/firmware versions.
**Describe the solution you'd like**
Add a tag with each …
-
Hi all, I recently installed the SKR Mini E3 V2.0 in my Ender 5.
Everything works as expected except the z-value changing during a print. The printer homes just fine, BLTouch works as it should, bu…
-
hey folks, i could greatly use some help. first off let me tell you my skill level. I'm one of those that can learn things if given the right tools and pointed in a good direction. can figure stuff ou…
-
Hi, is there any pin that I can use for third thermistor sensor for heated chamber?
I tried Z stop and PS-on. No luck.
-
Hi All, Just got the skr mini e3 V2.0 and installed in my Ender 3. Worked fine. I downloaded the latest .bin from the here and put it on the SD and rebooted. Now, I get a blue screen and nothing el…