-
I'm using a Wemos/Lolin 1.44" 128x128 7735 TFT. It's the one that plugs into the Lolin D32 Pro and I think the same as the Adafruit 1.44" TFT.
I've set the display type to DISP_TYPE_ST7735R (B se…
-
OS: Raspbian Jessie 2020-04-10
Running on an Banana Pi M2 Zero
Python 2.7.13
Traceback (most recent call last):
File "gif.py", line 45, in
spi_speed_hz=4000000
File "/home/pi/.loc…
-
Hi Marián!
Are you open to contributions for this project? I am planning on spinning a few custom boards with a 1.4" TFT using the ST7735 driver and this looks to be a good start point..
I tend …
-
Hi I have made my custom hardware where I am custom SPI pins to communicate with VS1053b chip and A TFT Display.
I am able to test my display properly but not able to run VS1053b.
I checked with l…
-
Seems like it is unable to compile for esp32-c3.
I've tested on other boards and it worked fine.
IDE: Arduino
Version: 2.4.72
Processor: ESP32-c3-32s
TFT Driver: ST7735S 80x160
Interface: SPI
…
-
Hi! I have two ips displays of size 1.14 and 1.8 on the st7789 and st7735 controllers. I also use your libraries for controllers. For use in an optical system, it is necessary to flip/reverse the imag…
-
hello i use the nucleo 64 from STM with the micro STM32F103RB
SO if i do a simple program the blink led, it work.
but when i try program to use the TFT i have a error
and the error apear when …
-
Hello, I tried to use your Ucglib library on an ESP32 board made by Espressif and both HWSPI and SWSPI don't work.
I used your Hello World example as a test and it failed to work. I only get a whit…
-
Hello,
I'm trying to follow the steps on this github, however facing some issues
I have a M5Stick-C model and want to try to connect this with some old probes installed on my bathrooms and allow m…
-
I uploaded the example file to my ESP32 dev board and the HCSrceen.cpp had an issue with the Color565() method (turned out new library changed the capital C to smaller case c but even after that and u…