-
I modified the LR1110 Modem application to work with a custom board with controller STM32WB55RGV6. My code is updated in the following link.
https://github.com/kvkc97/lr1110_modem_application_example…
-
**Describe the bug**
Hi,
I need to do some Direct Test Mode for BT and I tried to build Zephyr hci_raw module to run one of prepared example from Zephyr: /zephyr/samples/bluetooth/hci_uart/.
It see…
-
**Describe the bug**
The clock_control_get_subsys_rate() calls returns the wrong frequency value for the PLLCLK clock source on the affected STM32 targets. This is a result of using the wrong PLL sou…
-
Hi, thanks for this, really helps me get up the learning curve for this part. I believe what's happening is binaries.py has not been updated with the ST releases. eg. stm32wb5x_BLE_LLD_fw.bin is not…
-
Hi Experts,
I found that the ACK of GSDK3.2.1 and GSDK4.0.2 are different. I'm not sure which is correct.
Maybe this is the reason why commissioning failed with ST end device. #331
[sniffer.…
-
### Description of defect
The program is crashing on the wisun TLS process for the NUCLEO_WB55RG when using the hardware acceleration (**MBEDTLS_CONFIG_HW_SUPPORT**), which is active by default. …
-
Looking at pwm property `st,prescaler` accross STM32 dtsi files,
it appears that for some timer instances, value is 0, for other instances it is 10000.
It seems that there is no reason to have eithe…
-
Hey,
thank you for the great implementation. At the moment I am working with STM32WB MCUs, which are used in a test scenario as broadcaster, a raspberrypi as observer. I can read the custom advertise…
-
**Describe the bug**
iwdg_stm32_install_timeout does not return because it is stuck inside `while (LL_IWDG_IsReady(iwdg) == 0)` loop.
It looks like k_uptime_get_32 returns the same value for every c…
-
**Describe the bug**
I am trying to contribute a new overlay file for samples/boards/stm32/power_mgmt/serial_wakeup to help folks with the Nucleo_WL55JC but I have hit a snag. Following the previous …