-
Hi,
I am using waveshare's [https://robu.in/product/bluetooth-4-0-nrf51822-eval-kit/](url) and using STM32f407 discovery board (removing the jumpers for using SWD connector) for flashing using onboa…
-
Hello.
i am trying to make work the "en_speech_commands_recognition" example, but when the wake word detect the watchdog resets the esp, so i disable the watchdog, and now when detect the wake word s…
-
I have very limited experience with all of this, but the pwnagotchi project has partial refresh working great on the waveshare v2 and I was thinking maybe the code could be adapted here?
The releva…
-
### The problem
Hello,
I wanted to know is someone achieve to display from a 4.20in V2 (it's writtent v2 in a sticker on the back and rev2.2).
Because it's working well when I upload an example…
-
Hi, I downloaded the provided image and flashed it onto …
-
Looking at the driver fort the ILI9486 it looks like it uses different pins than is documented for the Waveshare board.
I presume if this is the case I'd need to make a copy of the ili9486 folder a…
-
# Interfacing Waveshare 1.47" LCD With ESP32 & LVGL | Aravind VS
Interfacing a Waveshare 1.47 inch rounded corner LCD display module with ESP32 & LVGL library
[https://blog.aravindvs.com/posts/inter…
-
**Is your feature request related to a problem? Please describe.**
Please support the [Waveshare WM8960 Audio HAT](https://www.waveshare.com/wm8960-audio-hat.htm) as an audio output device. It is i…
-
I'm trying to make the Waveshare 10.1" LCD DSI to work on Rock 4B+ by porting the driver from Raspberry 6.1 kernel. I modified the code and the modules builds and loads properly. The image on LCD appe…
-
**Describe the problem you have/What new integration you would like**
I have a Waveshare 0.96" 80x160 TFT SPI Display which uses the ST7735S controller. The screen protector film has a Blue tab. …