-
**Describe the bug**
Until OCPN 5.6, my set-up received NMEA0183 data from my NMEA2000 network via an Actisense W2K converter that sent the data over WiFi. So OCPN receives the data as NMEA0183.
No…
-
#### Problem Description
After following all the steps mentioned in the docs, nothing is woking.
Config in my case:
- Windows 10 PC that should be MitM'ed. Set static IP to 192.168.0.130 and ga…
-
### What is the issue?
If I enable Tailscale on my Android phone, DNS will fail resolution if I am not on my local network.
This ONLY happens if I enable Tailscale while not connected to my home net…
-
We are having problems with iOS devices disconnecting from the network at one of our sites, which appears to have got worse with recent versions of iOS. Whilst I believe this to be an issue between th…
keean updated
8 months ago
-
Windows XPSP3, XX-Net 3.14, 启用模块GAE和smart router，开启远程
ipad（ios7已越狱）设置wifi代理，safari 浏览器
如果设置wifi代理为GAE的8087，所有都走GAE，正常；
如果设置wifi代理为smart router的8086，转发GAE的仍然正常，直连的经常出现空白页访问不了。示例：
`
2020-02-21 10:4…
-
Version: **v0.15.5**
### Steps to reproduce:
1. Within the networkInformation object, set the type to "wifi". Wait for connection to resume as expected.
2. Within the networkInformation object, s…
-
I have tried this procedure twice to verify this is what is happening.
1st boot of Astroberry from SD card, run update then upgrade. Changed the display resolution and reboot after upgrade. Wifi …
-
1. dmesg log
[ 14.621790] ath11k c000000.wifi: **Not multipd architecture**
[ 14.622462] ath11k c000000.wifi: ipq6018 hw1.0
[ 14.627033] remoteproc remoteproc0: powering up cd00000.qcom_q6v…
-
Hi!
I was investigating connection issues related to our WiFi shield as can be seen on [my forum post](https://openbci.com/forum/index.php?p=/discussion/2293/impedance-commands-not-working-through-…
-
Hi!
I have a Netgear R9000 router and tried updating to the latest version (06-19-2024-r56941), but the router somehow bricks. Wireless networks wont start and several lights wont come on (probabl…