-
Originally reported this bug to the pi pico arduino library here: https://github.com/earlephilhower/arduino-pico/issues/1735 but was directed to check here for a potential issue/fix as the implementa…
-
Firstly, thanks for gbs-control!
> This wasn't asked for, so no worries if it's off the table.
I used [Bootstrap](https://getbootstrap.com) to put together an improved Web GUI:
- works at all s…
-
Honeywell discontinued the serial interface module to connect RS232 to the EnviraCOM bus. The EnviraCOM specs for the 3 wires are: 2 wires for 24VAC and 1 wire for data. Can you share what voltage t…
-
Over in https://community.home-assistant.io/t/feedback-on-component-for-sleepiq-beds/3132/7?u=technicalpickles there is some discussion around SleepIQ supporting setting firmness without needing to be…
-
I'm trying to develop a bluetooth network with one client and several servers, but they communicate with the client based on "notify". If they have the same service UUID and characteristic UUID i won'…
-
Is it possible to assist with flashing the YLXD05YL and YLXD01YL models of the Yeelights?
Photos attached of mainboards.
Thankyou
![20210403_074056](https://user-images.githubusercontent.com/5162…
-
Hello,
Thank you for this firmware.
My ESP32 is connected to the wifi and to the mqtt broker, I can see it in the mosquitto log files with a successful status.
Playing with my M531, I cannot see an…
-
Read your AutoRCCar, I was interested, but would like to ask you some questions about your host computer what operating system? I'm under my windows host computer to compile and run the wrong side of …
-
Hi,
I have been testing both the sidddy / Flora and Lociii / Flora but I runt into issues.
With the Lociii fork I get this after it connects to the flora:
- Failed to find data service
Anyone …
-
Is it possible to use the ESP32_BLE_Arduino library to build a HID-Keyboard to send keystrokes to another device? My goal: I would like to connect a ESP32 board to a BT device like an iPad and send a …