-
Hi,
For a project I have to add a custom driver. So the C code is already available. There is also a interface file for the spi_init, spi_read, and so on available. Is there a good sample driver w…
-
-
### CircuitPython version
```python
Adafruit CircuitPython 9.0.5, gemma m0
```
### Code/REPL
```python
from board import APA102_MOSI, APA102_SCK
```
### Behavior
Unable to find import, though c…
-
**Is your feature request related to a problem? Please describe.**
The HD108 is a relatively new 16-bit two-wire chipset supporting very fast data rates (40 MHz) and PWM rates (27 kHz). It has a simi…
-
Trying to send multiple bytes in an SPI transfer from buck50.py, I'm unable to find a method to keep /CS (NSS) asserted for the complete transfer. Presently /CS rises briefly after each byte is sent, …
-
Hello Awawa!
First of all I'd like to thank you for all the work you've put into this project, which is quite simply the most accomplished on the ambilight scene!
I'm back from the early days of amb…
-
How about one that is all green and then a single random led twinkles white then goes back to green to provide an old school simple look.
-
### The problem
Hello,
board: Lolin ESP32-S3
I'm trying to get the LED (WS2812) on the board to light up. But it doesn't want to compile with that exact pin(gpio 38).
Thanks in advance!
### W…
-
there are 64x64 HUB75 panels that only have A & B address lines.
The Raspberry pi LED driver project has added support for these panels, I would like to drive the same panels with my Smart Matr…
-
After connecting to Dc5v its only lighted up the first led bulb and it was green and others were not. Why is that. Does it need a controller or something to work the whole strip