-
Hi Adam, I hope this message finds you safe and well. Unusual times... I've got a Polar Ignite watch that I'm trying to pull the data from. I'm a beginner python person, and the python projects for…
-
Hi Rene,
I like to give your js a try to use it with some garden lights which i gathered very cheap ;)
They are discovable by bluetooth Triones-FFFF80XXXXXX. i already get them work by tracking t…
-
The Pi 400 has no WiFi with the LinuxCNC RT kernel.
There are some clues here: https://archlinuxarm.org/forum/viewtopic.php?f=15&t=14868
However simply adding the bcm2711-rpi-400.dtb file as in the…
-
I built the image (Android 11) as per the instructions. It boots and outputs to HDMI well. It also recognizes my wireless keyboard (via USB dongle). But Bluetooth is not working. Is that expected, or …
-
Awesome work!
For my Xiaomi Mi Kettle from European distribution the ProductID is 275, it took me a while to figure this out - was failing while trying the 131 from aprosvetova's work.
I run the dem…
-
I noticed a strange behaviour of my rpi B+ with some usb mice. 3 different models have been tested.
1. The system doesn't start Rio(halting at Plan 9 Console window) with wired A4Tech X6-60MD mouse…
-
I have python program which is sending image over mqtt but also can save image to disk
I am using pizerow with original picamera, did install `python3-picamera2`
I did check, everything is updated
…
-
Raspberry Pi 4 with 8Gb RAM
balenaOS 4.0.26+rev1
No DAC
I installed balenasound and didn't change any settings.
I can connect to the device with any of Bluetooth / Airplay / Spotify Connect.
…
-
**Describe the bug**
Connected two Raspberry Pi W using 6lowpan and ping is working fine with global address at both devices. However, it seems that no programs can send data through the interface, I…
-
Firstly, I would like to say a big thank you. I have found your example code very useful where there is not much information regarding Bluez on the Internet.
However, I'm not sure how to communicate …