-
I have a DHT22 Temp sensor. I am new to Python and I was wondering if there is any sample code to show how to incorporate those readings for indoor Temp/humidity?
I can probably write the function…
-
Hallo, ich habe in der Configuration gesehen dass NEO-6M unterstützt wird und am Pin D5 und D6 unterstüzt werden. Zustätzlich habe ich ein Display SH1106, SDS001, DHT22 und eben den GPS Sensor NEO-6M …
-
_From @austinmeier on August 8, 2018 4:32_
There are too many errors for that specific log.
```
[WARNING] __main__ 2018-08-03 02:20:15,647 one of the sensors could not be read, defaults used.
[E…
-
Hello @ankurp
I have dht22 and I also have some time - [Pi Thermostat] ERROR Getting temperature.
Can You help with this error ?
Thank You
-
Would it be possible to implement a correcture value to the DHT22 as the measurement, in my case, always differ about 3,4°C with the Outdoor weatherstation next to it.
Kind Regards
-
Build a device to measure the humidity and temperature in a greenhouse and control 2 x 230VAC circuits. The first circuit will be used for controlling the watering, the second is unused.
**Optional r…
-
I started tinkering with the bsec python library and the pi3g breakout board (bme688 sensor). Loved the coding part but my readings are really off vs. a control DHT22 which I have running on the same …
-
Hello, on my floor heater system is composed of several water collectors and I would like to measure the temperature at 4 different levels. Could you enhance Espurna to support several Dallas or DHT22…
-
### Description
`fetchInterval` pulls far more often than twice per second. Resulting data is corrupted. My guess is that you're using an integer for that, and only allow seconds. Then the program au…
-
Has anyone here done any testing on the different types of temperature sensors? Zigbee ones tend to send update once there's a 1 degree change, whereas 415mhz sensors sends an update once every 15-20s…