-
I have a side-by-side Samsung fridge with a USB wifi dongle connected with Smartthings and some sensor values only show "unknown" in HASS.
Fridge model: Samsung RS8000 (RS6GN8222S9/EG)
Wifi dongle: …
-
Hi folks,
Quick Details:
Hardware: ratgdo 2.52i
Firmware: 2.56 (Current), Also tried 2.57
GDO: **Overhead Door Odyssey 1000**
GDO Control Protocol: Sec2 and Sec1
Overall my issue seems ver…
-
Can be used to create virtual sumarized states. (Combined with logical operations such as "and", "or", "average")
Examples:
- 2-3 Temp sensor values are combined into a single "average" state valu…
-
### Before submitting this form
- [X] I have checked that this sensor type was not suggested for addition before; I know that it could
be in open or closed issues, and if there was another issue ment…
-
Thanks for this integration! I've successfully installed and logged in using 1.70 version.
After installation I first thought that the integration shows only some basic info. But fortunately I look…
-
## Specifications for new sensor / switch / or other device ...
- manufacturer: https://github.com/mightymos/ReedTripRadio
- model name:
- pictures of the device / the board (very help…
-
### Prerequisites
* **Model name of your Devices:** eTRV0100, eTRV0103, TS0601. Information below is provided from **eTRV0100** (=Danfoss Ally). All other thermostats show the same issue.
* Outp…
-
Hi @salvatoreraccardi ,
great work. Been watching it on YouTube. Loved it!
Just to let you know I'm sharing your project on my own "Home automation" projects here on GitHub.
Here's the link :
[h…
-
Does it support viewing more info about motion / magnet door sensor?
Such as "something is moving" or "door is open"
Many thanks.
-
i got v3.48 for my obd wican
Enable HA Discovery is greyed out. i cannot select Enable
![image](https://git…