-
Hi. I have to take a wire from dut.qspi(0).sck in ArtyShell.scala. I am trying to run e300 on Kintex. Since Kintex QSPI clock is only available through Startup2e. So I need to take wire from flash qsp…
-
**Pre-Requisites:**
- TH_CR1 = Test harness as Commissioner 1
- TH_CR2 = Test harness as Commissioner 2
- DUT = Commissionee
**Steps to Reproduce:**
1. Commission DUT to TH_CR1
2. TH_CR1 reads…
-
Hi! @urish
I'm trying to use wokwi cli now to use http get ip-location, but the information I get is incomplete, can you check it?
The code as follows:
```c
#include "esp32-ip-to-geolocation.…
-
Hi,
Coming from a (basic) usage of [`unittest`](https://docs.python.org/3/library/unittest.html), I think it would be nice if cocotb had some kind of `setUp()`/`tearDown()` handles available (as d…
-
As discussed in this PR: https://github.com/project-chip/connectedhomeip/pull/35322#discussion_r1739403129
It is awkward to check for successful read as shown in the following test code:
```
…
-
There is a major issue with the part of test.py responsible for testing the multiplexer.
[4df0a62](https://github.com/JAC-EE/tt08-SegDecode-ASIC/commit/4df0a62ccf6a4d1bc013a6502cd1fbe8a4ab66d4)
-
The scaled prototype cell seems to be producing useful output.
The next step is to understand the amplitudes of the peaks and how this compares to the requirements for standards.
Example scans
…
-
**Describe the bug**
ARP Request with Hardware and Protocol Sender Address set to broadcast. test is Fail on Zephyr3.0.0 on qemu_x86
**References**
RFC 826: page 4
RFC 1122: section 3.3.6 {Silently…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
### Hierarchy of regression failure
Block level
### Failure Description
```
* `xmsim: *E,ASRTST (/home/eb/opentitan/scratch/HEAD/aes_unmasked-sim-xcelium/default/src/lowrisc_ip_aes_*/r
tl/aes_core.…