-
I need your help because my new ebusd system just throws error messages when trying to decode messages:
```
root@ioBroker-Pi:~/ebusd# ebusd -f --loglevel=debug -d 192.168.178.142:9999 --latency=20…
B-G-T updated
4 years ago
-
Is it possible, to read the actual state of the solar pump?
Vaillant autoMatic VRS 620/3
I can't finde the corresponding value...
version: ebusd 22.3.p20220508
update check: revision v22.3 ava…
-
Hello,
I have a VRC700 with serial ebusd-converter on a raspberry 3B+ at GPIO.
Thats my ebusctl i:
version: ebusd 3.2.v3.2-11-g18bd21f
signal: acquired
symbol rate: 21
max symbol rate: 62
…
-
Hi,
as per subject. In my case displayed temperature from VRC470 is always 0.
-
Hi, i have the same heater, ariston Genus one. What device should I buy to read data via ebus? Is it 2 way communication? I have ethernet near heater. Will appreciate help!
-
Hi,
I recently installed ebusd as a docker-image on my raspberry-pi and all is working fine except one ecu. For the ecu of my fresh-water station the csv-File cannot be loaded. The log shows this …
-
Witam. Posiadam kocioł saunier thema condens i sterownik exacontrol e7r c (radio). Moge odczytać parametry z kotła, jednak nie mogę załadować pliku dla sterownika exacontrol e7r c. Zależy mi na możliw…
-
Hi there,
I bought https://adapter.ebusd.eu/v31/ and now testing.
Calling ebusctl find gives me this:
```
…
…
omu Timer.Thursday = no data stored
omu Timer.Tuesday = no data stored
omu T…
-
Hi at all,
i started to use ebusd with ebusadapter to get data from my hautec heatpump. Installation went realy easy and i could collect data. But now there is my problem. I want to start decoding t…
-
I use a [eBUS adapter 2](https://ebus.github.io/adapter/base.en) and try to connect it with a nodeMCU (because the D1 stopped working).
Should the adapter3 FW work with the old boards?
I tried the …