-
After I switching to OH2 (2.0b3), I frequently get the problem that OH2 is spamming the KNX bus with the same messages over and over again:
> 2016-07-18 08:45:33.748 [WARN ] [.binding.knx.internal.bu…
-
i'm trying to read serial port EnOcean Pi(TCM310 as Raspberry Pi module) with this package. This works but not as expected. Each message is splitted in three and sometimes in two parts. The first mes…
-
**Acknowledgement:**
First, I would like to thank Angelnu for this great repository! Binning the CCU2 into a docker container is one of the best and most flexible solutions for systems that should …
-
Arduino Uno dirket per USB Kabel am Raspberry Pi angebunden.
433MHZ Empfänger XD-RF-5V
Empfangspin ist am Pin 2 (D2) des Arduino Uno angeschlossen.
Automatisches Device wurde in Fhem angelegt…
-
Moin moin,
ich möchte anfangen auch IP-Komponenten einzubinden und gerne auf YAHM umsteigen.
Ich würde gerne YAHM virtualisiert auf X86 laufen lassen und die Anbindung über das HM-MOD-RPI-PCB mach…
-
_From [malberto...@gmail.com](https://code.google.com/u/115272201868874891941/) on November 19, 2012 13:30:10_
1. I have a Secant Cardio IIè Home Automation Central Unit, and I want to build a KNX gat…
-
When installing the image, fire up the board and answering all questions (with default), homegear will not be on the installation.
After some searching and debugging I found this:
```
pi@homegear…
-
- User loxberry in die Gruppe gpio
- WiringPi in Basissystem
-
Hello,
I've installed the nodes on a raspberry with node-red version 0.17.5 and node-js 6.11.2
I have a USB Stick connected and see the device in /dev folder
when I add the node to a flow, I get th…
-
Hi Holger, Hi Nabbl,
thank you very much for realising the implementation in node red so quickly. I copied the example flow, and in the flow there is written "connected" under the node but unfortun…