-
Hi ConducPham
I have a problem with ping pong sketch. I am using arduino mini with Doorji lora sx1278.
SPI Wiring Connections
Arduino mini - Doorji LoRa
10 - D5
11 - MOSI
12 - MISO
13 - SCK
…
-
Hello all,
Fine work that has been done here, but it seems completely dead. Are there any plans to continue or would it be better to hand the reigns to someone else?
-
Can anyone summarize what are the dependencies and versions critical for successful running of pyscenic. I have tried most of the methods described in the issues section by double checking the databas…
-
Thanks for what looks like such a fun example + which should be far easier to implement that my feeble old-man fuddles. I have a 32x32 linked to an Adafruit LED Matrix Shield, which is linked to a Met…
-
First tried on a Arduino DUE and feather M0 -> no EEPROM Support
switched to 32u4 (has EEPROM) but no Timer2 available so I modified the code to use Timer1
after compile & upload the serial device…
-
Hi,
i'm using adafruit feather m0 express and have done following things till now
1) I modified the SDUBoot file for the above board.
2) Then compiled binary for that, and created hex dump of it.
…
-
Hello !
I'm using an Arduino M0 (ARM Atmel SAMD21 microcontroller) with a SX1272 LoRa module.
But when I transfer your code on the Arduino, after having set up config.h and the keys in the 'ttn-a…
-
https://github.com/adafruit/Adafruit_FONA/blob/4a556e180fdeefb9518fac160a8abf915ae8c92c/Adafruit_FONA.cpp#L153
The function was made, and an attempt to parse was complete, but never finished. It wo…
-
Dear author,
![image](https://github.com/aertslab/create_cisTarget_databases/assets/44579368/5af2741c-9927-4233-a042-c4b3ac6ff286)
I built the library based on the method mentioned in the lib…
-
Hey I just wanted to double check about the pinout.
TX (sender) is A0
RX (receiver) and the output pin is 6
Am I reading this correct?