-
Win10, 32bit, german, ugsplatform.exe
HP nw8240, 2GB RAM, ATI FireGL5000
on double click to ugsplatform.exe
the UGS startup notice appears,
then there is a massage that UGS is not totally tran…
-
Hello,
I have a wifi-password that ends with the '!' character.
This seems to be a problem for the current firmware.
Entering it via WEBUI fails to work
Using the GCODE interface to set it resul…
-
4.7.0
Win 10
The slicing engine seems to be struggling with circular perimeters. 99% of the code is fine, but there are random slowdowns during printing at 70 mm/s on a Duet Maestro, which should …
CCS86 updated
2 years ago
-
I'm working with the 3d printing，I‘ve read the README file and know that the GRBL is not support the E Non-command word， but the Gcode file I generate from STL file (using Slir3c and KISSSlicer) conta…
-
i recently had pb to write the start/end gcode working with marlin
the problem was the use of command which are buffered (g1) and some who are not (look like g28 are not) so some commands where ignore…
-
I recently updated my firmware to latest (commit 598c7aea5dcf2883e69e353dfa0957d0273b6432) and facing an issue with my prints: they do not finish.
On last layer (top solid infill) it doesn't complete …
-
#### What were you doing?
Using imported gcode produced with Simplify3D. This contains an initial priming line from X0 to X200.
#### What did you expect to happen?
GCODE viewer/interpreter wo…
-
Hello everybody,
i made an CBC-"Milling" Machine by myself. It also can print in 3D if i had made an extruder ;-). I decided to use Marlin as Firmware on an Arduino-Board with a RAMPS-Shield 1.4 on i…
-
I had submitted this issue over to Slic3r first ([#1873](https://github.com/alexrj/Slic3r/issues/1837)), moved here after their review.
When trying to print the standard 20mm calibration cube to cal…
-
Hi, many thanks for posting this library,
sorry this is not an issue but just I need some help using this library. I wrote here because I do not know how contact you.
I'm new to JS and threejs, jus…