-
### EX-DCCInspector Version
9.1.0
### Bug description
I have a board with an ESP32 **S** on it.
I use this board to decode DCC signals which works perfectly (on GPIO 4). So I know that th…
-
Apparently there is no _#define_ for the wireless stick lite V3, thus, in the file _Heltec.cpp_ the LoRa object is not created, resulting in a compile error due to the object not existing. Even after …
-
If I compile the **LoRawan_TTN** example for the **Heltec_Wifi LoRa32(v3)** the compiler misses **RADIOLIB_LORAWAN_NO_DOWNLINK**.
Is this a mistake on your side, or has the example program to be …
-
I own a Wifi LoRa32 v2 and I checked the distance between the header pins and it comes out to be lesser than ``25.4mm`` which is in https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series/tree/master/Kica…
-
I'm attempting to join an HTCC-AB01 Cubecell node to a private gateway. I've successfully joined a Heltec esp32 to this gateway.
With the CubeCell device I'm unable to successfully join (accordi…
-
I recently purchased the ESP32 from Heltec, but am having an issue adding the heltec library to my arduino software.
I tried adding this link in preferences https://github.com/fantasticdonkey/uLoRa…
-
### Current Situation
With the original rtl_433 version and an SDR stick I can retrieve the BRESSER 7-in-1 weather station with the following command: rtl_433 -f 868.2M -s 1000k -X 'n=Bresser-7in1,m=…
-
- [x] **Feature Request**.
- [x] **PlatformIO Core**.
### Configuration
**Operating system**:
Win 10, Visual Studio Code
**PlatformIO Version** (`platformio --version`):
PlatformIO Core, …
-
Hello,
i have a Heltec Wireless Stick Lite (Panda).
For this board i have selected PIN_OUT==5 for ESP32/Heltec Wifi in the configGway.h, which should have the same pins as my board. Unfortunately …
-
### Firmware Version
All
### What did you do?
Try to set ADC multiplier override but unable to because it’s only available on esp32 devices.
### Expected Behavior
To be able to set the…