-
This is a todo list of what features I'd like to see in this to consider using it; not that my opinion carries much weight, but it's a good place to start.
- [ ] QEI encoder read/reset/enable inter…
-
Updated to the latest version, sensor readings are the maximum possible value...
**Log:**
[20:51:35][W][mlx90614:031]: Ambient temperature out of range: 1037.549927
[20:51:35][W][mlx90614:040]: O…
-
Hello, I've tried to use this module but I got huge temperature values, around 1000ºC. Which could it be the reason? Does this module work with single zone MLX90614 sensor?
-
Is it possible to conduct a hard reset on the SPS30?
When uploading new code while a previous program is running and accessing the sensor through I2C, the command ".probe()" usually fails. If the sen…
-
Make your question, not a Statement, inclusive. Include all pertinent information:
What you are trying to do
I tried to use ESP32 wroom dev board and use Adafruit_MLX90614 and MAX30102 sensor on…
-
Hello,
I'm using ESP32-S2 (ESP32-S2-Saola-1 Board, having ESP32-S2 Wroover model). I'm trying to connect ESP32-S2 with MLX90614 via I2C interface and have connected SDA to PIN8 and SCL to PIN9 of ESP…
-
The last few weeks we're running out of the space available for the sketch.
The test and dev builds now approach their max size so something has to change.
I think the sets of `normal`, `test` and…
TD-er updated
2 years ago
-
i cant install nvidia-dkms 525.89.02
log say
`==> dkms install --no-depmod nvidia/525.89.02 -k 6.2.6-zen1-1-zen
Error! Bad return status for module build on kernel: 6.2.6-zen1-1-zen (x86_64)
Co…
-
**Describe the bug**
The following was reported by a HoverGames participant.
q: i recall a sensor bus choking issue. is that present in 1.9.2? and corrected in later versions?
[10/24 4:06 AM] M…
-
I have bought 6pack of Arduino Nano Every and built a splecial shield plate, so I can connect thermal sensor MLX90614, which communicate over I2C (A4,A5). The sensor was well tested on few Nano device…